ASV RT-50 Posi-Track Loader (RT50) | Superseded by RT-60 (RT60)

Product Information

NOTE: this machine has been superseded by the ASV RT-60 – click here to view.

Economical and Versatile.

ASV’s mid-sized RT-50 Posi-Track is your best bet for working economically in a wide range of jobs and ground conditions.

It offers excellent balance and versatility and is easy to operate. You can dig, carry and load more because of the RT-50 has optimal tipping load and low-effort operation.

The smooth-running diesel engine gives you plenty of power when you need it.

Choose between the standard 15-inch wide tracks, smooth Turf Tracks or the 16.5 inch wide Extreme Terrain Tracks with aggressive treads.

Product Specifications

Operating weight 6,520 lb / 2,957 kg
Ground pressure @ operating weight 3.7 psi / 25.5 kPa
Rated operating capacity (35% tipping load) 1,600 lb / 725 kg
Tipping load 4,570 lbs / 2,072 kg
Travel speed, max. 8 mph / 13 kph
Type Diesel, 4-cylinder, naturally-aspirated
Model Perkins 404D-22
Displacement 134 cu. in. / 2.2 L
Gross power rating @ 2800 rpm 50 hp / 37.3 kW
Emission controls Meets all US EPA Tier 4 final standards
Track type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. A "Turf Track" with smooth treads is optionally available. An "Extreme Terrain Track" with aggressive treads and wider width (16.5 in / 419 mm) is also optionally available. Tracks have a single row of track drive lugs molded in.
Standard track width 15 in. / 381 mm
Length of track on ground 59 in. / 1499 mm
Track drive system Two hydrostatic direct-drive sprockets controlled by a single joystick.
Track drive sprockets Elevated, with low-friction and replaceable roller sprockets.
Undercarriage suspension Two independent torsion axles per undercarriage (side).
Roller wheels 12 high-density polyurethane and rubber wheels per track. Wheels include sealed roller bearings.
Roller wheel diameters Front wheels - 14 in / 365 mm; middle wheels - 10 in / 254 mm
Pump capacity 16.3 gpm / 61.7 lpm
System pressure 3,000 psi / 20 670 kPa
Controls Intermittent via button on loader control joystick, or continuous via dash-mounted switch.
Couplers Push-to-connect quick-couplers are mounted on loader arms. Pressure relief valve is mounted to coupler block.
Hydraulic cooling system High-efficiency side-by-side radiator and oil cooler.
Nominal charge 12 V
Battery 770 CCA
Charging system 65-amp alternator.
Outlets One 12-volt convenience outlet inside operator station.
Wiring Pre-wired for all factory-available accessories.
Seat Adjustable contour vinyl seat with built-in operator-presence switch, lap bar and two-inch / 51 mm wide seat belt.
Loader control Right-hand pilot-operated hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of aux. hydraulic system.
Drive control Left-hand pilot-operated hydraulic joystick controls machine speed and direction.
Engine speed Foot pedal and hand-operated throttle lever.
Indicators & gauges Engine oil low-pressure light; Hydraulic oil high-temperature light; Engine high-temperature light; Battery low-voltage light; Hourmeter; Fuel gauge.
ROPS Meets SAE J1040 MAY94 and ISO 3471.
FOPS Meets SAE J1043 SEPT87 and ISO 3449.
Illumination Four fixed forward-facing halogen lights; One adjustable rear-facing light; One interior light.
Convience One 12-VDC power port located inside operator station.
Audible alarms Horn and backup alarm are standard.
Fuel tank 13.7 gal / 51.9 L
Hydraulic tank 8 gal / 30.3 L
Engine coolant/antifreeze 2 gal / 7.5 L
Engine oil, including filter 11.2 quarts / 10.6 L

The following machine attachments are optionally available:

Auger drive and bits
Grapple bucket
Pallet forks
Broom, rotary
Power box rake
Bucket, general purpose
Bucket, light material
Bucket, multi-purpose
Snow blower
Snow blade
Stump grinder
Brush cutter, rotary
Dozer blade
Vibratory roller
Eliminator rake

AKA RT50, PT50, ASV50