Dealer

Social

ASV RT-40 Posi-Track Loader

Product Information

Unmatched Power & Performance in a Small Package.

ASV’s new RT-40 Posi-Track loader brings unprecedented performance and power in a compact machine.

As a sit-on loader with only a 4-foot width, the RT-40 is ideal for landscaping, tight access site cleaning or other general purpose use, and it packs incredible lift capacity and speed.

Along with the machine’s reliability, serviceability and comfort, you’ll feel the difference sitting in the RT-40.

Product Specifications

Operating weight 4,175 lb / 1,894 kg
Ground pressure @ operating weight 3.5 psi / 24.1 kPa
Rated operating capacity (35% tipping load) 931 lbs / 422 kg
Tipping load 2,660 lb / 1,206 kg
Travel speed, max 7.1 mph / 11.4 kph
Type Diesel, 3-cylinder, Turbocharged
Model Kubota D1803-CR-T
Displacement 111.4 cu. in. / 1.82 L
Gross power rating @ 2800 rpm 37.5 hp / 27.9 kW
Emission controls Meets all US EPA Tier 4 final standards
Track type Track type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Single row of track drive lugs molded in. Turf track with smooth tread available as an option.
Track width 11 in. / 279 mm
Length of track on ground 55 in. / 1,397 mm
Ground contact area 1,210 sq. in. / .78 sq. m.
Drive system Two hydrostatic direct-drive sprockets conrolled by a single joystick.
Track drive sprockets Elevated, with low-friction, replaceable sprocket rollers.
Undercarriage suspension Two independent torsion axles per undercarriage (side).
Roller wheels 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings.
Roller wheel diameter 10 in. / 254 mm
Pump capacity 13.3 gpm / 50.35 lpm
System pressure, max 3,000 psi / 20,684 kPa
Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch.
Couplers Push-to-connect quick couplers mounted on loader arm. Pressure relief valve mounted to coupler block.
Cooling system High-efficiency hydraulic oil cooler beside (not stacked) engine radiator.
Nominal charge 12 V
Battery 525 CCA
Charging system 60-amp alternator
Convenience outlet Two 12-VDC port inside operator station
Wiring Pre-wired for all facrtory-available accessories
Seat Adjustable contour vinyl suspension seat with built-in operator presence switch, lap bar and 2-inch | 51 mm wide seat belt.
Loader controls Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic.
Drive control Left-hand pilot hydraulic joystick controls machine speed and direction.
Engine speed Hand-operated rotary throttle.
Indicators & gauges Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge.
ROPS Meets SAE J1040 MAY 94 and ISO 3471.
FOPS Meets SAE J1043 SEPT87 and ISO 3449.
Illumination Two fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light.
Audible alarms Horn and back-up alarm are standard.
Fuel tank 13 gal / 49 L
Hydraulic tank 3.5 gal / 13.25 L
Engine coolant / antifreeze 1.8 gal / 6.8 L
Engine oil, including filter 7.4 quarts / 7 L

The following attachemnts are available as options:

Auger drive and bits
Backhoe
Broom, rotary
Bucket, GP
Bucket, light-material
Bucket, multi-purpose
Brush cutter, rotary
Dozer blade
Eliminator rake
Grapple bucket
Pallet forks
Power box rake
Snow blade
Snow blower
Stump grinder
Trencher
Vibratory roller